Donkey Forklift Steering Arm Repair and Reinforcement in Fargo

This Donkey forklift came to us with a steering arm that had already been through a previous repair attempt. That repair had failed - badly. The area around the pivot bore was gouged out and structurally compromised, leaving the arm in worse shape than if it had never been touched. A failed weld repair on a steering component is not something you can ignore and hope for the best.

We made the trip to Fargo and handled everything right at the customer's location. No trailer, no haul-out, no waiting for a shop slot to open up. That matters when a machine is sitting dead and costing you time. The first step was fully gouging out the failed repair material and rebuilding the damaged area from scratch - getting back to clean, solid steel before adding anything new.

Once the base material was properly rebuilt, we fabricated and installed custom-cut reinforcement plates directly over the steering arm. You can see the finished plates bolted and welded into place, fitted cleanly around the pivot bearing and tied into the surrounding structure. This is not a patch - it is a structural upgrade over what was there originally.

That is the difference between fixing it right and fixing it again later. When a previous repair has already let someone down, the next repair has to be better than original spec. The reinforcement plates we added distribute load across a wider area, reducing the stress concentration that caused the first failure. The steering arm is back together, the machine is back to work, and it is built to stay that way.

This is exactly what our heavy equipment welding and equipment crack repair work is built for - structural failures on machines that cannot afford to sit. If you have got equipment down in North Dakota or Minnesota and hauling it to a shop is not practical, we can come to you and get it done right at your location.